Innovative Production Cell for Food & Beverage Can Lids
Together with its project partners, Upper Austrian company Elmet has developed an innovative production cell. The system manufactures four different covers for beverage and food cans, which have been dubbed as „smart caps“. Smart cap is a collaborative project by Elmet, Sumitomo (SHI) Demag, Shin-Etsu, and Mettler Toledo. In the form of Elmet‘s smart shot E and smart mix TOP 7000 Pro systems, two of thecompany‘s technological flagships are used in the production cell. The system will be presented for the first time at K 2022 at the exhibition booth of Elmet‘s partner Sumitomo (Hall 15, Booth D22). The leading business platform for the plastics and rubber industry takes place in Düsseldorf from October 19 to 26, 2022.
In the 26 years since it was founded, Elmet has become a global player in the development and production of high-quality equipment for manufacturing silicone parts. Partners from all over the world utilize the know-how from Upper Austria for developing innovative systems. Most recently, Elmet has collaborated with three project partners to develop a production cell that manufactures four different lids for beverage and food cans. The accuracy of the injection process is ensured and documented by a weighing cell. A laser marks the finished smart caps to ensure optimal traceability.
Leading Elmet technology twice over
Lids for food & beverage cans are manufactured by an Elmet injection mold, featuring an all-electric smart shot Evalve-gate cold-runner system. Its technological high-end counterpart in material provision is the Elmet smart mix Top 7000 Pro dosing system, responsible for precise and reliable dosing of material to the Elmet injection mold. A Sumitomo linear handling device removes the parts from the mold and transfers them to the weighing cell made by Mettler Toledo. Every single part is weighed there. The result is stored in a database and also displayed graphically to demonstrate the process accuracy of the system. After the weighing process, the silicone parts are marked by laser to ensure hghest possible traceability. After lasering, the parts are placed on a conveyor belt.
The interaction provides the magic
The new system is not only innovative in terms of the perfect symbiosis of technology-leading Elmet elements. The magic of this innovation unfolds in the interaction between the high-tech contributions from the four partner companies. The combination of high-precision dosing (Elmet smart mix Top 7000 Pro), the all-electric injection-molding machine (Sumitomo IntElect), and the electric valve-gate cold runner (Elmet smart shot E) enables a previously unachievable level of accuracy in the reproduction of part weights. The special four-cavity injection mold from Elmet injects four different can lids made of liquid silicone (LSR) from partner company Shin-Etsu. The silicone lids produced serve as coverings for customary beverage cans that have been in use for decades, such as those for soft drinks,energy drinks and various alcoholic beverages. A separate cavity also producescovers for customary food cans made of sheet steel, which protect the contents from insects, for example, and keep the opened cans fresh in the refrigerator.
Elmet smart mix TOP 7000 Pro
The dosing system is a new development from the Austrian company. Development work focused on reducing the unit‘s footprint to 1,150 x 790 millimeters. This makes the system the smallest liquid-silicone dosing system for 200-liter container units on the market. Compared to its predecessor, the smart mix TOP 5000 P, the smart mix top 7000 Pro features a completely new pump system, which now only contains approximately one third of the liquid silicone in the system, making it much easier to clean. This characteristic is very important, particularly for use in the medical and pharmaceutical fields, where the pump unit is dismantled and cleaned each time the material changes, in order to prevent mixing of different types of liquid silicone. Apart from the new pump unit, an optimized follower plate geometry also helps reduce the amount of residual material. The new system boasts a material utilization level of up to 99.6%. Drums are changed fully automatically to increase ease of use and keep the amount of training to a minimum. Use of special seals made of FDA-compliant materials also predestines the smart mix TOP 7000 Pro for medical applications
Teamwork at the global player
Not only know-how from Elmet can be found in the sophisticated system. „Only when combined with the all-electric ijection-molding machine from Sumitomo, the weighing system from Mettler Toledo, and the liquid silicone (LSR) from Shin-Etsu does the unique system become a total work of art that we are all really proud of,“says a delighted Harald Wallner, CEO at Elmet. The system can be seen for the first time at the Sumitomo booth at K 2022 in Düsseldorf, Hall 15, Booth D22.
Elmet smart shot E with smart scontrol
The all-electric Elmet smart shot E valve-gate cold-runner system guarantees precise filling of every single cavity in a reliable process. Settings for the cold runner are entered on an 18.5“ display of the external smart control unit. Thanks to servomotors, it allows needle adjustments in increments of two thousandths of a millimeter. Needle regulation is carried out in real time and monitored continuously by the system. The innovative arrangement of the mini servomotors enables nozzle spacings of 44 millimeters. Pneumatic components, on the other hand, are a thing of the past. This saves energy and facilitates ingenious cable management with industrial plug connections, which allows cleaning work to be performed on the cold runner without any qualified electrical personnel.
#modernplasticsindia #plasticmagazine #indianmagazine #indianplasticmagazine #modernplasticsaward #ginujoseph #modernplastic #plasticindia #plasticnews #plasticrecycling
