Linkedin Facebook Youtube Instagram X-twitter Telegram
Smooth Reverse Effect Button Nominate Now Modern Plastics Award
  • HOME
  • About Us
  • News
    • Industry News
      • Market Report
      • Opening & Expansions
      • Expansions & Appointments
      • Partnership
      • Show News
      • Achievements
      • Awards & Recognition
      • Partnership
    • Technology & Innovation
      • Driver & Motors
      • Drives & Connectors
      • Gear & Pump
      • Innovation
      • Laser Update
      • Rapid Prototyping
      • Sensors & Connectivity
      • Software Update
      • Technology News
      • Technology Update
    • Machinery & Equipment
      • Ancillary
      • Ancillary Equipment
      • Automation & Robotics
      • Automation Update
      • Auxiliary
      • Hot Runner
      • Machinery Update
    • Materials & Compounding
      • Additives
      • Bio-Plastics
      • Colourants & Masterbatch
      • Compounding
      • Engineering Polymers
      • Master Batches
      • Material Update
      • Pigments & Master Batches
      • Thermoplastics
      • Wood Plastics Composites
    • Injection Moulding
      • Blow Moulding / Blow Molding
      • Extrusion
      • Hot Runners
      • Mould Making & Tooling
      • Pipe & Profiles
      • Sheet & Pipe
      • Thermoforming
    • Packaging & Printing
      • Packaging News
      • Packaging Update
      • Printing & Packaging
      • In-Mould Labeling (Labarity)
    • Features & Insights
      • Special Article
      • Product Launch
      • Interview
      • Research & Developments
      • Tête-à-Tête
    • Sustainability & Recycling
      • Circular Economy
      • Environment & Recycling
      • Environment & Sustainability
      • Recycling News
      • Recycling Update
    • Automotive & Mobility
      • Automotive
      • e-Mobility
    • Cables & Connectors
      • Wire & Cable
      • Drives & Connectors
    • 3D Printing & Prototyping
      • 3D Printing
      • Rapid Prototyping
    • Medical & Healthcare
      • Medical Plastics
    • Testing & Inspection
  • Magazine
    • Magazines
    • Supplement
    • Show Daily
    • Coffee Table Book
  • Gallery
    • PlastIndia 2023
      • Day 01
      • Day 02
      • Day 03
      • Day 04
      • Day 05
    • Die Mould India 2022
      • Day 01
      • Day 02
  • Supporters
  • Advertise
    • Quick REF
    • Media Kit
    • Milestone
  • Webinars
  • Team
  • Contact us
MPI-LOGO-New-Png-3-1
  • HOME
  • About Us
  • News
    • Industry News
      • Market Report
      • Opening & Expansions
      • Expansions & Appointments
      • Partnership
      • Show News
      • Achievements
      • Awards & Recognition
      • Partnership
    • Technology & Innovation
      • Driver & Motors
      • Drives & Connectors
      • Gear & Pump
      • Innovation
      • Laser Update
      • Rapid Prototyping
      • Sensors & Connectivity
      • Software Update
      • Technology News
      • Technology Update
    • Machinery & Equipment
      • Ancillary
      • Ancillary Equipment
      • Automation & Robotics
      • Automation Update
      • Auxiliary
      • Hot Runner
      • Machinery Update
    • Materials & Compounding
      • Additives
      • Bio-Plastics
      • Colourants & Masterbatch
      • Compounding
      • Engineering Polymers
      • Master Batches
      • Material Update
      • Pigments & Master Batches
      • Thermoplastics
      • Wood Plastics Composites
    • Injection Moulding
      • Blow Moulding / Blow Molding
      • Extrusion
      • Hot Runners
      • Mould Making & Tooling
      • Pipe & Profiles
      • Sheet & Pipe
      • Thermoforming
    • Packaging & Printing
      • Packaging News
      • Packaging Update
      • Printing & Packaging
      • In-Mould Labeling (Labarity)
    • Features & Insights
      • Special Article
      • Product Launch
      • Interview
      • Research & Developments
      • Tête-à-Tête
    • Sustainability & Recycling
      • Circular Economy
      • Environment & Recycling
      • Environment & Sustainability
      • Recycling News
      • Recycling Update
    • Automotive & Mobility
      • Automotive
      • e-Mobility
    • Cables & Connectors
      • Wire & Cable
      • Drives & Connectors
    • 3D Printing & Prototyping
      • 3D Printing
      • Rapid Prototyping
    • Medical & Healthcare
      • Medical Plastics
    • Testing & Inspection
  • Magazine
    • Magazines
    • Supplement
    • Show Daily
    • Coffee Table Book
  • Gallery
    • PlastIndia 2023
      • Day 01
      • Day 02
      • Day 03
      • Day 04
      • Day 05
    • Die Mould India 2022
      • Day 01
      • Day 02
  • Supporters
  • Advertise
    • Quick REF
    • Media Kit
    • Milestone
  • Webinars
  • Team
  • Contact us
logo_black-2.svg
Modern Plastics TV
Modern Plastics TV
Smooth Reverse Effect Button Nominate Now Modern Plastics Award

Sustainable Water Management in the Face of Climate Change

Ginu Joseph by Ginu Joseph
July 8, 2023
in News, Features & Insights
To counter the effects of climate change, a new irrigation system for optimised water resource management has recently been laid in Bedburg-Pütz.
👁️ Post Views: 138,339

Sustainable Water Management in the Face of Climate Change

Lighthouse project for energy-efficient irrigation system with durable and robust SIMONA PE 100-RC Line pressure pipes

Eric Schönel

Climate change is associated with extreme weather conditions such as heat waves and droughts. Such events also have an impact on agriculture: the proliferation of droughts causes severe soil damage and crop failures. Against this backdrop, innovative solutions in support of the economical and efficient supply of water for the cultivation of arable land are being welcomed with open arms at a political level. The Ministry of the Environment, Nature and Transport of the State of North Rhine-Westphalia recently funded the “Bedburg-Pütz Irrigation Project” with up to 5.6 million euros. The sprinkler system featuring optimised irrigation management is intended to provide sufficient water for the fields, especially in dry summer periods, and thus ensure good harvests. Environmentally friendly installation as well as the durable and robust properties of the underground piping system are as essential to the overall concept as the irrigation technology itself. Hard-wearing PE 100-RC Line pressure pipes engineered by SIMONA were the natural choice. They were laid by IFK GmbH using the cost-effective and minimally invasive ploughing method.

Those managing the project opted for PE 100 RC-Line pressure pipes. The extruded polyethylene pipes combine the benefits of durability and efficient handling.

Potatoes, carrots, onions and the like – even field vegetables tend to “feel the heat” in summer. What may seem innocuous actually turns out to be a significant threat to food cultivation. As a result of climate change, with ever warmer and longer-lasting hot spells, the soil is drying out and crops are facing the challenge of water shortage. As a consequence, harvests may be significantly impaired or crops may fail entirely. With this in mind, farmers from North Rhine-Westphalia have recently joined forces to form a public association aimed at implementing an efficient irrigation system for their fields, featuring optimised control and watering technology.

The ploughshare with the displacer is the so-called leading edge when it comes to underground installation: it loosens the soil so that the pipe can be pulled into it.

Comprehensive, cross-regional distribution of water

The project in Bedburg-Pütz represents a modern approach to climate change adaptation. Thanks to optimised irrigation management and improved distribution technology, the irrigation system supplies the fields in the Bedburg region with water throughout the year in a manner that is both economical and efficient. This also includes the area surrounding the Garzweiler open-pit lignite mine. In the context of open-pit mine dewatering, the groundwater was removed down to a depth of 260 metres by means of pumps. Irrigating the above-mentioned crops with the help of the public water network, availability of which remains limited, would be challenging and extremely expensive. With this in mind, the water needed for irrigation is to be pumped from the southern section of the 2,400-hectare association-managed area in Bedburg to the open-pit mine in the north via a network of water pipes spanning a length of approximately 20 kilometres. During dry periods, therefore, water supply is assured not only for crops grown in Bedburg but also for those cultivated in neighbouring areas. In addition, water distribution featuring optimised irrigation management offers a number of options for future expansion in support of climate-friendly regional supply. At the same time, it provides the basis for greater diversity with regard to cultivation, thus adding value for the farms and incentivising other downstream processing companies to settle in the region.

A key feature of the construction project in Bedburg-Pütz: the laying operation included several pipe sections comprising up to 60 pipes that had been welded directly to each other to create the extensive pipeline system.

Durable pipe systems

In future, 2,500 hectares of arable land are to be irrigated with around 1.5 million cubic metres of water per year. For this purpose, the project includes the construction of six deep wells and a pipeline network spanning around 20 kilometres. The latter is made up of highly durable and robust PE 100-RC Line pressure pipes manufactured by SIMONA AG, one of Germany’s leading producers of semi-finished thermoplastics and pipes. Durability is one of the key features of the single-layer pressure pipes made of extruded polyethylene. PE 100 pipes boast a service life of more than 100 years. Another benefit is their internal and external corrosion resistance, which ensures maintenance-free operation. The smooth internal pipe surfaces reduce pressure losses over the entire service life. In addition, the PE 100-RC pipes offer increased resistance to slow crack growth and high resistance to point loads. Thanks to their low weight, installation is simple, fast and cost-effective, even with long pipe lengths. Added to this is their high flexibility, which helps to prevent fractures of the pipe in the event of pressure surges or ground settlement. The polyethylene pipes comply with DIN 8074 in respect of dimensions and tolerances, in addition to meeting the quality requirements of DIN 8075. Last but not least, the polyethylene pipes are recyclable and thus resource-friendly, which further underlines the eco-friendly focus of the Bedburg-Pütz construction project.

Faster, more environmentally friendly, more cost-effective: applying the ploughing method, even long pipe sections can be laid in a short space of time and with significantly less environmental impact.

Cost- and resource-friendly installation method

When it came to installing the pipes, the choice was made to lay them by means of the ploughing method. Salzburg-based IFK GmbH is a specialist in this field: cables and pipe systems are inserted directly into the ground using a plough. Applied since the 1960s in Germany, the method has been steadily refined and is particularly suitable for arable land and wetlands, along roads and paths as well as in forests and woodlands. The state-of-the-art ploughing method combines the benefits of outstanding environmental compatibility and superior cost-effectiveness. It is the perfect choice when it comes to laying long lengths of pipe in a short space of time – faster than with an excavator. In addition to reducing construction time and causing less disruption to traffic, this procedure also comes with a lower risk of accidents, is cable- and pipe-friendly, and usually allows the surrounding vegetation to recover quickly because of the “minimally invasive” (similar to a zip) displacement of soil. The cost savings, e.g. compared to construction with a trencher or excavator, are considerable.

The plough consists of a ploughshare, the laying box as well as a winch which is hooked up to a towing vehicle. At the starting point, the ploughshare is inserted into the ground – along the specified route – to the desired depth; in Bedburg-Pütz it was 1.7 metres deep. The towing vehicle pulls the pipe laying unit – together with the ploughshare and pipes – towards it by means of a winch. The ploughshare loosens up the ground as it is drawn forward, and the pipes are thus pulled into the ground. The soil then closes up over the pipe again and can also be compacted if necessary. In Bedburg-Pütz, several hundreds of metres of pipe were laid as welded sections. Since February 2023, eleven kilometres of water pipeline, featuring PE 100-RC Line pressure pipes, have already been laid for the eastbound line. A further nine kilometres of SIMONA pressure pipes for the westbound line are to follow in June 2023. They serve as water pipelines for the sprinkler systems. Construction work is scheduled for completion in August 2023.

A long section of the newly laid pressure pipes leads north to the Garzweiler open-pit lignite mine, the objective being to supply the fields there with sufficient water throughout the year.

State funding for lighthouse project

The rationale behind the irrigation of arable land for the purpose of ensuring the regional supply of the Ruhr region and the Rhine corridor – with up to 10 million consumers – is to guarantee the cultivation of food in the long term. With this in mind and given the choice of a state-of-the-art installation method and extremely durable and robust pipes, the Ministry of the Environment, Nature and Transport of the State of North Rhine-Westphalia rates the project as a so-called lighthouse project in the context of climate change adaptation and is funding the construction of the irrigation system with up to 5.6 million euros.

www.simona.de

 

#modernplasticsindia #plasticmagazine #indianmagazine #indianplasticmagazine #modernplasticsaward #ginujoseph #modernplastic #plasticindia #plasticnews #plasticrecycling #modernplasticsglobalnetwork #modernglobalnetwork #modernplasticsaward2023 #plasticIndustry #modernplasticsgermany #modernplasticsmiddleeast #modernplasticsamerica #modernplasticsbangladesh #modernplasticsasia #modernplasticsitaly #simona

SendShareSendShareTweet
Previous Post

Röchling Takes Over Compotech AG

Next Post

BEST LINE Systems from BST Set New Standards in Quality Assurance

Ginu Joseph

Ginu Joseph

Editor in Chief and CEO

Related Posts

ENGEL Showcases Advanced Technologies And AI-Driven Solutions At Plast 2026
Technology & Innovation

ENGEL Showcases Advanced Technologies And AI-Driven Solutions At Plast 2026

May 30, 2026
Covestro Launches New TPU Application Development Center In China
Innovation

Covestro Launches New TPU Application Development Center In China

May 28, 2026
Plastpol 2026 Brings The Global Plastics Industry Back To Europe’s Center Stage
PRESS RELEASE

Plastpol 2026 Brings The Global Plastics Industry Back To Europe’s Center Stage

May 28, 2026
Glasstec 2026 Opens Ticketshop And Unveils Initial Programme Highlights
Industry News

Glasstec 2026 Opens Ticketshop And Unveils Initial Programme Highlights

May 27, 2026
FIMIC Expands Recycling Solutions Portfolio With New RMP And FPP Melt Pumps
Recycling News

FIMIC Expands Recycling Solutions Portfolio With New RMP And FPP Melt Pumps

May 26, 2026
Chinaplas 2026: Reifenhäuser Brings Its New Generation Film Lines To China For The First Time
Packaging & Printing

Chinaplas 2026: Reifenhäuser Brings Its New Generation Film Lines To China For The First Time

May 26, 2026
Flexipet Unveils Redesigned PET Thermoforming Sheet Extrusion Line
Thermoforming

Flexipet Unveils Redesigned PET Thermoforming Sheet Extrusion Line

May 25, 2026
Arburg’s Polish Subsidiary Enters A New Management Era
Industry

Arburg’s Polish Subsidiary Enters A New Management Era

May 25, 2026
Evonik Opens New Magnet Wire Innovation Lab For PEEK Solutions In China
Show News

Evonik Opens New Magnet Wire Innovation Lab For PEEK Solutions In China

May 22, 2026
Next Post
BST, a leading full-service provider of quality assurance systems for the web processing industries, introduces the BEST LINE product series. Under the motto Performance3, this product Line presents four technologically advanced products that set new standards.

BEST LINE Systems from BST Set New Standards in Quality Assurance

Since March 14th This Year, Kai Gottwald has Joined Dr. Stephan Gneuss as Director of Gneuss GmbH.

Since March 14th This Year, Kai Gottwald has Joined Dr. Stephan Gneuss as Director of Gneuss GmbH

Please login to join discussion
asdfvbn

Follow Us

Modern Plastics India, India’s only monthly plastics magazine which is jumping into its Twenty Fifth (25th) years of publication with the highest print and digital circulation.

Linkedin Facebook Youtube Instagram X-twitter Telegram
MODERN BUSINESS GLOBAL NETWORK

Modern Business India
Modern Business Asia
Modern Business Europe
Modern Business America
Modern Business Gulf

Load More

MODERN PLASTICS GLOBAL NETWORK

Modern Plastics India
Modern Plastics Asia
Modern Plastics Europe
Modern Plastics America
Modern Plastics Global

Load More

WOMEN INDIA NETWORK

Women India Network
Women India
Beauty N Fitness India
Beauty N Fitness Times
Modern Fashion Life Style

Load More

All Rights Reserved,  © 2000 – 2026.
Modern Plastics India™ Website Design By : Chrysolite Media Network Pvt. Ltd.®, Mumbai (IN).



No Result
View All Result
  • HOME
  • About Us
  • News
    • Industry News
      • Market Report
      • Opening & Expansions
      • Expansions & Appointments
      • Partnership
      • Show News
      • Achievements
      • Awards & Recognition
      • Partnership
    • Technology & Innovation
      • Driver & Motors
      • Drives & Connectors
      • Gear & Pump
      • Innovation
      • Laser Update
      • Rapid Prototyping
      • Sensors & Connectivity
      • Software Update
      • Technology News
      • Technology Update
    • Machinery & Equipment
      • Ancillary
      • Ancillary Equipment
      • Automation & Robotics
      • Automation Update
      • Auxiliary
      • Hot Runner
      • Machinery Update
    • Materials & Compounding
      • Additives
      • Bio-Plastics
      • Colourants & Masterbatch
      • Compounding
      • Engineering Polymers
      • Master Batches
      • Material Update
      • Pigments & Master Batches
      • Thermoplastics
      • Wood Plastics Composites
    • Injection Moulding
      • Blow Moulding / Blow Molding
      • Extrusion
      • Hot Runners
      • Mould Making & Tooling
      • Pipe & Profiles
      • Sheet & Pipe
      • Thermoforming
    • Packaging & Printing
      • Packaging News
      • Packaging Update
      • Printing & Packaging
      • In-Mould Labeling (Labarity)
    • Features & Insights
      • Special Article
      • Product Launch
      • Interview
      • Research & Developments
      • Tête-à-Tête
    • Sustainability & Recycling
      • Circular Economy
      • Environment & Recycling
      • Environment & Sustainability
      • Recycling News
      • Recycling Update
    • Automotive & Mobility
      • Automotive
      • e-Mobility
    • Cables & Connectors
      • Wire & Cable
      • Drives & Connectors
    • 3D Printing & Prototyping
      • 3D Printing
      • Rapid Prototyping
    • Medical & Healthcare
      • Medical Plastics
    • Testing & Inspection
  • Magazine
    • Magazines
    • Supplement
    • Show Daily
    • Coffee Table Book
  • Gallery
    • PlastIndia 2023
      • Day 01
      • Day 02
      • Day 03
      • Day 04
      • Day 05
    • Die Mould India 2022
      • Day 01
      • Day 02
  • Supporters
  • Advertise
    • Quick REF
    • Media Kit
    • Milestone
  • Webinars
  • Team
  • Contact us

© 2025 Modern Plastics India