Thursday, October 30, 2025
Modern Plastics India
k
Title of the document Nominate Now Modern Plastics Award
  • HOME
  • About Us
  • News
    • Industry News
      • Market Report
      • Opening & Expansions
      • Expansions & Appointments
      • Partnership
      • Show News
      • Achievements
      • Awards & Recognition
      • Partnership
    • Technology & Innovation
      • Driver & Motors
      • Drives & Connectors
      • Gear & Pump
      • Innovation
      • Laser Update
      • Rapid Prototyping
      • Sensors & Connectivity
      • Software Update
      • Technology News
      • Technology Update
    • Machinery & Equipment
      • Ancillary
      • Ancillary Equipment
      • Automation & Robotics
      • Automation Update
      • Auxiliary
      • Hot Runner
      • Machinery Update
    • Materials & Compounding
      • Additives
      • Bio-Plastics
      • Colourants & Masterbatch
      • Compounding
      • Engineering Polymers
      • Master Batches
      • Material Update
      • Pigments & Master Batches
      • Thermoplastics
      • Wood Plastics Composites
    • Injection Moulding
      • Blow Moulding / Blow Molding
      • Extrusion
      • Hot Runners
      • Mould Making & Tooling
      • Pipe & Profiles
      • Sheet & Pipe
      • Thermoforming
    • Packaging & Printing
      • Packaging News
      • Packaging Update
      • Printing & Packaging
      • In-Mould Labeling (Labarity)
    • Features & Insights
      • Special Article
      • Product Launch
      • Interview
      • Research & Developments
      • Tête-à-Tête
    • Sustainability & Recycling
      • Circular Economy
      • Environment & Recycling
      • Environment & Sustainability
      • Recycling News
      • Recycling Update
    • Automotive & Mobility
      • Automotive
      • e-Mobility
    • Cables & Connectors
      • Wire & Cable
      • Drives & Connectors
    • 3D Printing & Prototyping
      • 3D Printing
      • Rapid Prototyping
    • Medical & Healthcare
      • Medical Plastics
    • Testing & Inspection
  • Magazine
    • Magazines
    • Supplement
    • Show Daily
    • Coffee Table Book
  • Gallery
    • PlastIndia 2023
      • Day 01
      • Day 02
      • Day 03
      • Day 04
      • Day 05
    • Die Mould India 2022
      • Day 01
      • Day 02
  • Supporters
  • Advertise
    • Quick REF
    • Media Kit
  • Webinars
  • Contact us
  • Team
  • Modern Plastics TV
No Result
View All Result
Modern Plastics India
  • HOME
  • About Us
  • News
    • Industry News
      • Market Report
      • Opening & Expansions
      • Expansions & Appointments
      • Partnership
      • Show News
      • Achievements
      • Awards & Recognition
      • Partnership
    • Technology & Innovation
      • Driver & Motors
      • Drives & Connectors
      • Gear & Pump
      • Innovation
      • Laser Update
      • Rapid Prototyping
      • Sensors & Connectivity
      • Software Update
      • Technology News
      • Technology Update
    • Machinery & Equipment
      • Ancillary
      • Ancillary Equipment
      • Automation & Robotics
      • Automation Update
      • Auxiliary
      • Hot Runner
      • Machinery Update
    • Materials & Compounding
      • Additives
      • Bio-Plastics
      • Colourants & Masterbatch
      • Compounding
      • Engineering Polymers
      • Master Batches
      • Material Update
      • Pigments & Master Batches
      • Thermoplastics
      • Wood Plastics Composites
    • Injection Moulding
      • Blow Moulding / Blow Molding
      • Extrusion
      • Hot Runners
      • Mould Making & Tooling
      • Pipe & Profiles
      • Sheet & Pipe
      • Thermoforming
    • Packaging & Printing
      • Packaging News
      • Packaging Update
      • Printing & Packaging
      • In-Mould Labeling (Labarity)
    • Features & Insights
      • Special Article
      • Product Launch
      • Interview
      • Research & Developments
      • Tête-à-Tête
    • Sustainability & Recycling
      • Circular Economy
      • Environment & Recycling
      • Environment & Sustainability
      • Recycling News
      • Recycling Update
    • Automotive & Mobility
      • Automotive
      • e-Mobility
    • Cables & Connectors
      • Wire & Cable
      • Drives & Connectors
    • 3D Printing & Prototyping
      • 3D Printing
      • Rapid Prototyping
    • Medical & Healthcare
      • Medical Plastics
    • Testing & Inspection
  • Magazine
    • Magazines
    • Supplement
    • Show Daily
    • Coffee Table Book
  • Gallery
    • PlastIndia 2023
      • Day 01
      • Day 02
      • Day 03
      • Day 04
      • Day 05
    • Die Mould India 2022
      • Day 01
      • Day 02
  • Supporters
  • Advertise
    • Quick REF
    • Media Kit
  • Webinars
  • Contact us
  • Team
  • Modern Plastics TV
No Result
View All Result
Modern Plastics India
No Result
View All Result

Covestro Signs First Major Renewable Energy Agreement for Its US Operations

Ginu Joseph by Ginu Joseph
June 10, 2023
in PRESS RELEASE, Features & Insights
The virtual power purchase agreement between Covestro and Ørsted will help offset emissions at the Covestro site in Baytown, Texas.

Covestro Signs First Major Renewable Energy Agreement for Its US Operations

  • Long-term agreement signed with Ørsted as part of its planned Mockingbird Solar Center in Texas, U.S.
  • Covestro’s 90MW share of renewable energy estimated to offset 70,000 tons of CO2 emissions at its Baytown, Texas, site annually, starting in late 2024
  • Agreement equivalent to energy used to power more than 15,000 homes

Covestro, a leading manufacturer of high-quality polymer materials and their components, has signed a 90 megawatt (MW) virtual power purchase agreement (vPPA) with Ørsted, a clean energy leader in the U.S. market, headquartered in Denmark.

With various agreements in place, Covestro fosters the growth of renewable energy projects around the world. This newest 15-year agreement secures a portion of power from the Mockingbird Solar Center in Lamar County, Texas, marking Covestro’s first renewable energy agreement in the U.S. The vPPA is estimated to offset 70,000 tons of CO2 emissions annually and will reduce the scope 2 emissions from Covestro’s third largest production site, located in Baytown, Texas.

“This important new announcement builds upon Covestro’s existing agreement with Ørsted and clearly signals our commitment to the use of renewable energy,” said Markus Steilemann, CEO of Covestro. “The inclusion of renewable energy to help power our facilities is a critical component to reducing our scope 2 emissions and becoming operationally climate neutral by 2035.”

Covestro set itself ambitious climate neutrality goals in 2022. One major lever to reach these goals is energy from renewable sources, such as wind and solar power.

“The vPPA with Ørsted comes on the heels of our recent announcement of ISCC PLUS certification for our production site in Baytown, Texas,” explains Haakan Jonsson, chairman and president of Covestro LLC. “These two initiatives represent our focus on sustainability and the strategic path we have set to minimize our carbon footprint across Covestro’s operations in the United States. Cumulatively, projects like this help us realize our path to becoming fully circular.”

One concrete measure on this path is climate neutrality, which includes the switch to power from renewable sources. Covestro relies on agreements with power suppliers to facilitate this transition.

“We are thrilled to help facilitate Covestro’s entry into the U.S. renewable energy market with this newly signed virtual power purchase agreement,” said Monica Testa, Head of Origination at Ørsted. “The Mockingbird Solar Center is a unique project that represents both preservation and progress. The clean energy produced by the solar center will help Covestro to decarbonize its operations, while the conservation of rare native tallgrass prairie habitat supports plant and wildlife biodiversity in the region. We’re proud of the important outcomes this project achieves and look forward to our continued partnership with Covestro.”

Edison Energy worked with Covestro to broker the agreement for the vPPA. Ørsted’s Mockingbird Solar Center will produce enough clean energy to power roughly 80,000 homes and is expected to begin operation in late 2024. At that time, Covestro will start executing on the vPPA, which represents nearly 20% of the Mockingbird Solar Center’s capacity.

In December 2019, Covestro concluded a supply agreement for electricity from offshore wind turbines with energy supplier Ørsted. Starting in 2025, Ørsted will provide green electricity for ten years to supply Covestro’s production sites in Germany, generated in a newly built wind farm off the island of Borkum, Germany. At the end of 2022, Covestro had already covered 12 percent of its global energy requirements with electricity from renewable sources. That figure is expected to rise to 16 to 18 percent in 2023.

Ørsted, a leader in clean energy, and Covestro have established a virtual power purchase agreement for power from the planned Mockingbird Solar Center in Lamar County, Texas.

 

 

#modernplasticsindia #plasticmagazine #indianmagazine #indianplasticmagazine #modernplasticsaward #ginujoseph #modernplastic #plasticindia #plasticnews #plasticrecycling #modernplasticsglobalnetwork #modernglobalnetwok #modernplasticsaward2023 #PlasticIndustry 

SendShareSendShareTweet
Previous Post

MAAG Group Continues to Grow in China

Next Post

May 2023

Ginu Joseph

Ginu Joseph

Editor in Chief and CEO

Related Posts

An Executive Interview on the road to K 2025 with Dr Stefan Engleder, CEO ENGEL Group, It is still important for humans to operate machines
Features & Insights

An Executive Interview on the road to K 2025 with Dr Stefan Engleder, CEO ENGEL Group, It is still important for humans to operate machines

September 5, 2025
An Executive Interview on the road to K 2025 with Dr. Torsten Schmitz (Managing Director, Extrusion Business Unit) and Mr. Hermann Veismann (Managing Director, Printing and Finishing Business Unit) at Windmöller & Hölscher
Features & Insights

An Executive Interview on the road to K 2025 with Dr. Torsten Schmitz (Managing Director, Extrusion Business Unit) and Mr. Hermann Veismann (Managing Director, Printing and Finishing Business Unit) at Windmöller & Hölscher

September 5, 2025
An Executive Interview on the road to K 2025 with Mr. Marcel Moeller, Global Branch Manager Plastics Industry at Baumüller Nürnberg GmbH, Sustainability and circular economy are absolutely essential
Features & Insights

An Executive Interview on the road to K 2025 with Mr. Marcel Moeller, Global Branch Manager Plastics Industry at Baumüller Nürnberg GmbH, Sustainability and circular economy are absolutely essential

September 3, 2025
Redefining Modular Upgrade Concepts for the Future
PRESS RELEASE

Redefining Modular Upgrade Concepts for the Future

September 1, 2025
An Exclusive Interview on the way to K 2025 with Mr. Markus Vollmer, CEO of Kampf GmbH, Solution provider Kampf focusing on people and technology
Features & Insights

An Exclusive Interview on the way to K 2025 with Mr. Markus Vollmer, CEO of Kampf GmbH, Solution provider Kampf focusing on people and technology

August 28, 2025
Launch of New NSF-Certified Chemical Working Substances for Industrial Applications
Thermoplastics

Launch of New NSF-Certified Chemical Working Substances for Industrial Applications

August 23, 2025
An Exclusive Interview with Mr. Mariano Suarez, beyond carnauba bio-based waxes redefining stability and sustainability in coatings & Inks
Features & Insights

An Exclusive Interview with Mr. Mariano Suarez, beyond carnauba: bio-based waxes redefining stability and sustainability in coatings & Inks

August 22, 2025
An Exclusive Interview on the road to K 2025 with Peter von Hoffmann, General Manager Business
Features & Insights

An Exclusive Interview on the road to K 2025 with Peter von Hoffmann, General Manager Business Unit Compounding Machines, and Frank Lechner, General Manager Process Technology and R&D at Coperion, the twin-screw extruder enables high recyclate qualities

August 21, 2025
Next Post

May 2023

Creating Prototypes: 5 Unique Advantages of Injection Moulding.

Creating Prototypes: 5 Unique Advantages of Injection Moulding

Jindal Films Displays Recyclable PP Mono-Material Solutions at Interpack 2023 With Machinery Partners.

Jindal Films Displays Recyclable PP Mono-Material Solutions at Interpack 2023 With Machinery Partners

Please login to join discussion

Modern Plastics India, India’s only monthly plastics magazine which is jumping into its Twenty Fifth (25th) years of publication with the highest print and digital circulation.

Instagram Facebook X-twitter Youtube Linkedin Telegram
MODERN BUSINESS GLOBAL NETWORK

Modern Business India
Modern Business Asia
Modern Business Europe
Modern Business America
Modern Business Gulf

Load More

MODERN PLASTICS GLOBAL NETWORK

Modern Plastics India
Modern Plastics Asia
Modern Plastics Europe
Modern Plastics America
Modern Plastics Global

Load More

WOMEN INDIA NETWORK

Women India Network
Women India
Beauty N Fitness India
Beauty N Fitness Times
Modern Fashion Life Style

Load More

All Rights Reserved,  © 2000 – 2025.
Modern Plastics India™ and its related marks are registered trademarks of Chrysoprase Multimedia & Services Private Limited ®, Mumbai (IN).



No Result
View All Result
  • HOME
  • About Us
  • News
    • Industry News
      • Market Report
      • Opening & Expansions
      • Expansions & Appointments
      • Partnership
      • Show News
      • Achievements
      • Awards & Recognition
      • Partnership
    • Technology & Innovation
      • Driver & Motors
      • Drives & Connectors
      • Gear & Pump
      • Innovation
      • Laser Update
      • Rapid Prototyping
      • Sensors & Connectivity
      • Software Update
      • Technology News
      • Technology Update
    • Machinery & Equipment
      • Ancillary
      • Ancillary Equipment
      • Automation & Robotics
      • Automation Update
      • Auxiliary
      • Hot Runner
      • Machinery Update
    • Materials & Compounding
      • Additives
      • Bio-Plastics
      • Colourants & Masterbatch
      • Compounding
      • Engineering Polymers
      • Master Batches
      • Material Update
      • Pigments & Master Batches
      • Thermoplastics
      • Wood Plastics Composites
    • Injection Moulding
      • Blow Moulding / Blow Molding
      • Extrusion
      • Hot Runners
      • Mould Making & Tooling
      • Pipe & Profiles
      • Sheet & Pipe
      • Thermoforming
    • Packaging & Printing
      • Packaging News
      • Packaging Update
      • Printing & Packaging
      • In-Mould Labeling (Labarity)
    • Features & Insights
      • Special Article
      • Product Launch
      • Interview
      • Research & Developments
      • Tête-à-Tête
    • Sustainability & Recycling
      • Circular Economy
      • Environment & Recycling
      • Environment & Sustainability
      • Recycling News
      • Recycling Update
    • Automotive & Mobility
      • Automotive
      • e-Mobility
    • Cables & Connectors
      • Wire & Cable
      • Drives & Connectors
    • 3D Printing & Prototyping
      • 3D Printing
      • Rapid Prototyping
    • Medical & Healthcare
      • Medical Plastics
    • Testing & Inspection
  • Magazine
    • Magazines
    • Supplement
    • Show Daily
    • Coffee Table Book
  • Gallery
    • PlastIndia 2023
      • Day 01
      • Day 02
      • Day 03
      • Day 04
      • Day 05
    • Die Mould India 2022
      • Day 01
      • Day 02
  • Supporters
  • Advertise
    • Quick REF
    • Media Kit
  • Webinars
  • Contact us
  • Team
  • Modern Plastics TV

© 2025 Modern Plastics India